Not quite there yet. Some of the parts that are supposed to print support-free still have 90-degree overhangs that sag and deform when printing. The locking mechanism for attaching drawers is very rigid, likely dependent on the type of filament. Overall the system needs better documentation and the models need more refinement. It's early days so I have hope for the system but I wouldn't overhaul your workshop
RobVerified buyer
★★★★☆4/5
Small units flawless, issue with xl
I didn't have any issues receiving the files and right away printed three small draws, one in each height. They all printed flawlessly without changing any setting on my Anycubic Kobra X using 3 different brands of PLA.
I just bought a Kobra S1 Max mainly so I could print the XL versions to complete what I need. I didn't pay attention to the sizes or the fact that there were no options to split prints for smaller (256cubed) bed sizes to make the L or XL versions. That was my fault not USSAs. Now that I have the big bed size I tried the XL drawer and ran into my first issue. The drawer is too small for the module. I can't attach the drawer slides because they are a fraction too long preventing the drawer face (fascade) from being attached and if I attach one side the other won't go on due to the drawer being too narrow. I am going to try to print the drawer box 1 or 2% bigger to see if that fixes it. Overall I think it is a great system and am glad I got it.
NikolayVerified buyer
★★★★★5/5
Good stack of files
Everything seems to be in order.
DomiVerified buyer
★★★★★5/5
Content with this Storage system
Forever an expandable system. Already different drawers and boxes printed on my h2s and every time a perfect print..
Yah b.Verified buyer
★★★★★5/5
Great Product - Keep Going!
I got my download link straight away. The S3 drawer was easy to print with minimal supports, and the instructions were clear. The front lock was a little creaky, and a few parts needed supports even though the filenames didn’t say so. I spotted that before printing and didn’t have to throw away any parts.
Jack H.Verified buyer
★★★★★5/5
Very Stong Storage
I have printed an assortment of storage solutions. This is more of a professional solution. This requires printing and assembly of various parts. There are a lot of parts to do this correctly, but it give a very flexible solution that can be tailored to my needs. My printers have been running non-stop for days printing various sizes and colors
James WhitakerVerified buyer
★★★★★5/5
Finally got my workshop organised
I've been collecting screws, bolts and random fittings for years, and everything was just thrown into different containers. This system has made a massive difference. I printed a few drawers initially to see how they worked and ended up doing an entire section of my workbench. The modular design is brilliant because you can keep adding storage whenever you need it. Took a while to get everything printed, but I'm happy with the result.
Oliver BennettVerified buyer
★★★★☆4.5/5
Really good design, just takes some patience
The files are well thought out and the overall concept works nicely. I especially like being able to combine different drawer sizes rather than having everything the same. Printed mine on a Bambu Lab P1S using PLA. Most parts came out fine, although I had to adjust the fit on a couple of pieces. Nothing particularly difficult if you're familiar with 3D printing. Would recommend.
Daniel FischerVerified buyer
★★★★★5/5
Exactly what I needed for my garage
I was looking for something that would fit into the limited space above my workbench without having to buy another cabinet. Being able to choose the size of each drawer was the main selling point for me.
I've now got separate compartments for electrical connectors, screws, washers and small tools. The finished system looks much better than I expected. One of my favourite functional prints so far.
Thomas ReedVerified buyer
★★★★☆4/5
Good system but quite a bit of printing
I really like the idea and the finished boxes are sturdy enough for what I use them for. My only criticism is how long it takes to print a full collection. I underestimated the amount of filament and printer time involved.
If you're planning a large storage wall, I'd suggest starting with a few modules first. Otherwise, a very useful set of files.
Michael TurnerVerified buyer
★★★★★5/5
A clever alternative to shop-bought organisers
I have tried several storage solutions over the years, including some expensive drawer cabinets. The flexibility here is what sets it apart. I don't have to stick with a manufacturer's fixed sizes, and if I need another drawer I can simply print one.
The stacking arrangement is particularly satisfying once everything is assembled. Printed mine in grey with black handles and it looks great.
Sophie MartinVerified buyer
★★★★☆4.5/5
Useful beyond just workshop storage
I bought this mainly to organise craft supplies rather than tools. It works surprisingly well for small materials, clips, spare blades and other bits that were previously scattered around my desk.
I like that I can mix shallow and deeper drawers. Some of the components took a little experimenting to fit together properly, but overall I'm pleased. I would love to see more examples of creative layouts.
Robert HughesVerified buyer
★★★★★5/5
One of the better STL purchases I've made
What I appreciate most is that this feels like a complete system rather than a collection of unrelated models. Everything has a consistent design and the different modules work together nicely.
I started with six drawers and have already printed several more. My workshop is finally beginning to look organised instead of like a collection of half-finished projects.
Peter NovakVerified buyer
★★★☆☆3.5/5
Nice concept, but not completely straightforward
The design itself is very good and I can see why people like it. However, getting the parts to fit properly took more effort than I expected. I had to recalibrate my printer and reprint a couple of components before I was satisfied with the result.
Once assembled, the system works well and looks excellent. I just think beginners might find it slightly frustrating, especially if they're expecting everything to fit perfectly on the first attempt.
Andrew CollinsVerified buyer
★★★★☆4.5/5
My workbench looks completely different now
I originally intended to print just enough drawers for my electronics components, but ended up expanding it for screws and other hardware too. It's quite addictive once you start putting the modules together.
The design is smart and makes very good use of vertical space. I knocked off half a star because printing a complete setup can be a fairly big project, but I'm definitely happy with it.
David SchneiderVerified buyer
★★★★★5/5
Fantastic modular system
Very impressed with the design. Everything looks clean and consistent, and I appreciate being able to change my layout without starting from scratch.
I've been using mine for small mechanical parts and electronics. Being able to print replacement components is also a huge advantage. Would absolutely purchase again.
Benjamin ClarkeVerified buyer
★★★★☆4/5
Great results, but check your printer first
The storage boxes themselves are excellent and feel quite solid once assembled. I particularly like the variety of sizes available.
My main issue was that some larger pieces weren't suitable for my printer's build volume, so I had to rethink the configuration I originally wanted. That's something worth checking before buying. Otherwise, very happy with how the smaller modules came out.
Lucas WeberVerified buyer
★★★★☆4.5/5
Well designed and practical
I've used a lot of printable organisers and most of them end up being a compromise between appearance and functionality. This one manages both reasonably well.
The drawers are practical, and the stacking arrangement is a clever way to make use of workshop space. There is a little trial and error involved in getting the best print settings, but that's normal with projects like this. I'd buy it again.
Christopher EvansVerified buyer
★★★★★5/5
Much better than the storage boxes I was using
Previously I had about ten different containers sitting on my workbench, and finding anything was a nightmare. Now I've got a proper arrangement with drawers for each type of fitting.
The best thing is that I can expand it gradually instead of buying another complete organiser every time I run out of space. I'm printing a second set for my garage this weekend.
Matthew WilsonVerified buyer
★★★★☆4.5/5
Very satisfying project
I really enjoyed putting this together. The whole system has a nice engineered feel to it, particularly how the different modules stack.
Printing everything takes time, and getting the tolerances right needed a little adjustment on my machine. Once I sorted that out, though, assembly went quite smoothly. The finished result looks professional and is genuinely useful rather than just decorative.
Alexander BrownVerified buyer
★★★★★5/5
Brilliant for screws and small fittings
I've been meaning to sort out my collection of nuts, bolts and washers for ages. This was exactly the motivation I needed.
The different drawer sizes mean I don't waste space on things I only have a handful of. I also like that the whole thing looks neat when stacked together. Very pleased.
Stefan MüllerVerified buyer
★★★★☆4/5
Good product with room for improvement
Overall, I like the design and think it's a worthwhile purchase if you have a 3D printer and enjoy making practical things.
My only complaints are that some parts require careful printer calibration and the project uses more material than I initially expected. Better assembly instructions would also be helpful. That said, the finished storage system is useful and I have already made several additional drawers.
Ryan MitchellVerified buyer
★★★★☆4.5/5
Worth it for the customisation alone
I have a small home workshop and wanted a system that could grow with my collection of tools and hardware. This works very well for that.
I've printed three different configurations so far, and they all look good together. The drawer design is particularly nice. My first print needed some tweaking, but the rest have been fine. I'd recommend doing a test print before committing to a large batch.
George HarrisonVerified buyer
★★★★★5/5
Absolutely love this storage system
This is probably the most useful thing I've printed in months. I've been slowly replacing all the mismatched storage boxes in my garage, and the difference is huge.
I can actually find things now instead of spending ten minutes searching for the right screw. The modular approach is excellent, and being able to choose colours and sizes makes it even better. Already recommended it to a couple of friends who also have printers.
Edward PalmerVerified buyer
★★★★☆4.5/5
Clever system, takes time to build
The concept is excellent. I especially appreciate how you can arrange small and large drawers within the same overall setup.
I printed mine over several evenings rather than trying to make everything at once. Some patience is needed, particularly during assembly, but the result is worth it. My only suggestion would be a clearer guide showing the different possible combinations.
Nathan BrooksVerified buyer
★★★★★5/5
Exactly what a 3D printer should be used for
I've printed plenty of novelty items over the years, but this is the kind of project that makes the machine genuinely useful.
The storage system has completely changed how I keep my workshop hardware. It looks tidy, the drawers are practical, and I love knowing I can just print another module when I need more space. Excellent design and a very satisfying project overall.